CX660

High-end telematics platform with 4G / LTE and Dual-CAN

Perfectly equipped for demanding telematics applications that place the highest demands on position detection, communication, interfaces and computing power (edge computing).

1
2
3
4
5
6
Alternativer Text

Home » Pro-Series » Telematics » CX660

One device – all functions integrated

4G/LTE mobile
GNSS receiver
Data Logger
Control (PLC)
Cloud-Connector

Precise position determination with GPS, GLONAS and GALILEO ; 3D accelerometer and magnetometer, dual CAN for vehicle connection, numerous other interfaces (WLAN, BT LE, Ethernet, RS232, RS485, 1-Wire, USB, digital / analog I / O, audio, …) and protocols ( Modbus, MQTT) and future-proof 4G / LTE cellular connections make the CX660 the perfect platform for demanding telematics applications .

Future-proof mobile connectivity

With a multiband LTE Cat. 4modem, the CX660 has a modern and future-proof mobile radio connection, as LTE will represent the comprehensive backbone of mobile communications in the long term. Automatic fallback to EDGE / GPRS ensures optimal network availability. Voice with IVR (Interactive Voice Response) and DTMF as well as SMS complete the profile. With support for a wide range of frequency bands, the CX660 can be used worldwide.

Precise positioning

The CX660 has a highly sensitive GNSS receiver with support for GPS, GLONASS and GALILEO (99 acquisition channels / 33 tracking channels) with noise suppression and jamming protection. The support of DGPS (WASS, EGNOS, MSAS, GAGAN) further increases the positioning accuracy. Further sensors (3-axis acceleration sensor, 3-axis accelerometer and 3-axis compass) complete the equipment.

Powerful vehicle integration

Two independent complete CAN 2.0B interfaces with hardware filtering and multi-speed support allow comprehensive data acquisition even in complex vehicle installations. Additional units without CAN connection can be flexibly connected via the other interfaces of the CX660.

Sophisticated energy management

A built-in UPS (integrated LiIon battery), low power consumption and five execution speeds with wakeup events from various sources allow safe operation even on switched on-board power systems.

Performance and security for edge computing

The CX660 is based on a hardened Linux architecture with IEC 61131-3 (ST) runtime environment. The Arm®Cortex®– A5 processor with floating point support, DSP functions and cryptographic acceleration offers more than enough power for your edge computing applications. TLS/SSL support for all important TCP based protocols (e.g. MQTT, SMTP, Sockets) with full certificate management effectively protects your communication, e.g. with a cloud.

I/O interfaces for all needs

The CX660 has 5 digital inputs, 4 digital solid state outputs (36V / 1.5A), 2 analog inputs and 4 flex inputs (analog/digital). The interface equipment is completely transparently expandable via Modbus modules for the user software and can be extended almost indefinitely.

Versatile communication

In addition to the mobile network connection, the CX660 has a large number of interfaces: 100 Base-T Ethernet, DualCAN-2.0, RS-232, RS-485, 1-Wire, WLAN, Bluetooth LE und USB. For easy use of the interfaces, the development remotion provides support for a variety of protocols such as TCP/IP, UDP, SMTP, FTP, MQTT,1-Wire, M-Bus, Modbus (Master and slave).

All details

If you need further information: We have compiled the essential technical data and are at your disposal for a consultation by phone or email.

Hardware core

  • Cortex-A5 32Bit ARM
  • HW floating point and DSP
  • 128 MByte LP-DDR RAM
  • 512 MByte NAND Flash
  • 16 MByte NOR Flash
  • 8 MByte DataFlash
  • 128 KB SRAM with battery backup
  • Real-time clock with battery backup

Security

  • Integrated firewall
  • TLS/SLL support with certificate management
  • TLS/SSL support for SMTP, MQTT, FTP, HTTP, Gateway 2 and TCP/IP sockets
  • Hardware-supported cryptography: AES-128, AES-192, AES-256, DES, Triple-DES, HASH, RND and RSA

Memory

  • Persistent DataFlash (data logger)
  • Battery-buffered S-RAM
  • Internal flash drive
  • Circular data logger
  • SD card slot
  • Flash memory via USB

Mobile

  • Multi-band LTE Cat 4 with fallback to GSM/Edge 900/1800 MHz
  • DTMF Decoder / Transmitter
  • Voice Messages / IVR
  • Mini SIM (1.8 / 3 V)
  • eSIM (option)

GNSS / GPS

  • Multi GNSS: GPS, GLONASS and GALILEO
  • 99 acquisition / 33 tracking channels
  • SBAS (WASS, EGNOS, MSAS, GAGAN)
  • A-GPS capable
  • Anti-jamming, Noise cancellation
  • Active 3 volt GNSS antenna support

WIFI

  • Wi-Fi in the 2.4 GHz ISM band
  • IEEE 801.11b/g/n/d/e/h/i
  • WPA/WPA2 Encryption
  • Up to 150 MBit/sec

Bluetooth

  • Classic and Low Energy (LE)
  • BT 2.1 + EDR up-to 3 Mbps
  • BT 3.0 and 4.0 Dual mode
  • Co-existence with Wi-Fi

Audio

  • Full Digital Audio System
  • Transferring, saving, and playing audio
  • Line+Speaker Output
  • Microphone input
  • GSM audio support

CAN-Bus

  • <strong>Dual</strong> CAN 2.0B
  • Hardware-Filtering
  • Multi-Speed -Support

Wired communication

  • 10BASE-T Ethernet
  • 2x RS232
  • 1x RS485 with Modbus support
  • 1-Wire Bus
  • 2x USB Host

Digital I/O

  • 4 x Digital solid state output (max. 36 V - 1.5 A)
  • 5 x digital input
  • Transient protection
  • Low pass filter
  • expandable with Modbus modules

Analog I/O

  • 2x analog input (0..10V)
  • 12 bit resolution; •0.3
  • Low pass filter
  • Transient protection
  • expandable with Modbus modules

Flex Inputs

  • 4x analog/digital flex inputs
  • 0..30 V
  • Low pass filter
  • Transient protection

Electrical data

  • Operating voltage 8..36 V DC
  • Reverse polarity protection
  • 5 VDC-out @ 500 mA

Battery and charging logic

  • Internal 2.6Ah Li-Ion battery
  • Intelligent charger with temperature controller and support for temperatures below zero degrees
  • Battery temperature sensor

Energy

  • Power-saving modes
  • Events: timer, digial input, touch screen, CAN, power change
  • Battery temperature sensor
  • Support for larger external batteries

Climate

  • Operation: -40..+65 °C
  • Battery charging: -10..+45 °C
  • Storage: 0..+45 °C (recommended)
  • Humidity: 5..90 (non-condensing)
  • Protection class: IP20

Mechanical data

  • Dimensions (mm, without connections): 148 (W) x 122 (L) x 34 (H)
  • Aluminium/plastic housing
  • Weight: approx. 500g (without accessories)

Approvals

  • 2007/46/EC UN ECE R10 Rev. 05 (E1)
  • 2014/30/EU EMC Directive
  • 2011/65/EU RoHS Directive
  • Cellular: GCF/CE/FCC/PTCRB/IC/Anatel/SRRC/NAL/ CCC/KC/NCC/JATE/TELEC/RCM/IFETEL/FAC/ NBTC/ICASA