CX630

Powerful telematics system with 4G / LTE and dual CAN

Perfectly equipped for demanding telematics applications that place the highest demands on position detection, communication, interfaces and computing power (edge computing).

1
2
3
4
5
6
Leistungsfähiges Telematikgerät IEC 61131-3 ST Programmierung

Home » Pro-Series » Telematics » CX630

One device – all functions integrated

4G/LTE mobile
GNSS receiver
Data Logger
Control (PLC)
Cloud-Connector

Precise positioning with GPS, GLONAS and GALILEO; 3D accelerometer and gyroscope, dual CAN for vehicle connection, numerous other interfaces (BT LE, RS232, RS485, 1-Wire, digital/analog I/O, audio, …) and protocols (including Modbus, MQTT) as well as future-proof 4G/LTE cellular connectivity make the CX630 the perfect platform for demanding telematics applications.

Future-proof mobile connectivity

With a multiband LTE Cat. 4 modem, the CX630 has a modern and future-proof mobile communications connection, because LTE will represent the area-wide backbone of mobile communications in the long term. Automatic fallback to EDGE / GPRS ensures optimal network availability. Digitized Voice and DTMF as well as SMS complete the profile. Thanks to the support of a wide range of frequency bands, the CX630 can be used worldwide.

Precise positioning

Ds CX630 features a high-sensitivity GNSS receiver with support for GPS, GLONASS and GALILEO with interference rejection and jamming protection. The support of DGPS (WASS, EGNOS, MSAS, GAGAN) further increases the positioning accuracy. Further sensors (3-axis accelerometer, 3-axis gyroscope) round off the equipment.

Powerful vehicle integration

Two independent complete CAN 2.0B interfaces with hardware filtering and multi-speed support allow comprehensive data acquisition even in complex vehicle installations. Additional units without CAN connection can be flexibly connected via the other interfaces of the CX630.

Sophisticated energy management

A built-in UPS (integrated LiIon battery), low power consumption and various low-power modes with wake-up events from various sources allow safe operation even on switched on-board networks.

Performance and security for edge computing

The CX630 is based on a hardened Linux architecture with IEC 61131-3 runtime environment. The Arm® Cortex®– A7 processor with floating point support, DSP functions and cryptography acceleration provides more than enough power for your edge computing applications. TLS/SSL support for all major TCP based protocols (e.g. MQTT, SMTP, Sockets) with full certificate management effectively protects your communication, e.g. with a cloud.

I/O interfaces for all needs

The CX630 has 6 digital inputs, 4 digital solid state outputs (36V / 1.5A) and 2 analog inputs. The interface equipment is completely transparently expandable via Modbus modules for the user software and can be extended almost indefinitely.

Versatile communication

In addition to the mobile network connection, the CX660 has a large number of interfaces: 100 Base-T Ethernet, DualCAN-2.0, RS-232, RS-485, 1-Wire, WLAN, Bluetooth LE und USB. For easy use of the interfaces, the development remotion provides support for a variety of protocols such as TCP/IP, UDP, SMTP, FTP, MQTT,1-Wire, M-Bus, Modbus (Master and slave).

All details

If you need further information: We have compiled the essential technical data and are at your disposal for a consultation by phone or email.

Mobile

  • Multi-Band LTE Cat 4 (wordwide) max. 150 Mbps (DL) und 50 Mbps (UL); LTE FDD (15 Bands); LTE TDD (4 Bands); WCDMA (7 Bands)
  • GSM: Quad-Band
  • SMS / PDU
  • Sprachnachrichten / DTMF-Decoder
  • Dual Mini-SIM (1.8 / 3 V)
  • eSIM-Chip (Option)

GNSS / GPS

  • Multi GNSS: GPS, GLONASS and GALILEO
  • Dual Band (L1 / L5)
  • SBAS (WASS, EGNOS, MSAS, GAGAN)
  • A-GPS capable (RTCM v2.3 und v3.3)
  • Anti-jamming, Noise cancellation
  • Accuracy better 1m CEP (@ -130 dBm)
  • Active 3 volt GNSS antenna support
  • Optional: RTK with sub-centimeter accuracy
  • Optional: dead reckoning with IMU

Hardware core

  • Cortex-A7 32Bit ARM @800 MHz
  • HW floating point and DSP
  • 128 MByte LP-DDR RAM
  • 512 MByte Flash for firmware and application
  • Real-time clock with battery backup

Security

  • Integrated firewall
  • TLS/SLL support with certificate management
  • TLS/SSL support for SMTP, MQTT, FTP, HTTP, RCU gateway and TCP/IP sockets
  • Hardware-supported cryptography: AES-128, AES-192, AES-256, DES, Triple-DES, HASH, RND and RSA

Memory

  • Persistent DataFlash (data logger)
  • Internal 4GB flash drive
  • Circular data loggers

Bluetooth

  • Low Energy (LE 5.3)
  • IEEE 802.15.4-2011 PHY
  • Optional: Zigbee
  • Optional: OpenThread

Audio

  • Full Digital Audio System
  • Transferring, saving, and playing audio
  • Audio output
  • Microphone input
  • GSM audio support

CAN-Bus

  • <strong>Dual</strong> CAN 2.0B
  • Hardware-Filtering
  • Multi-Speed -Support

Wired communication

  • 2x RS232 (1x with control lines)
  • 1x RS485 with Modbus support
  • 1-Wire Bus
  • USB service/programming port

Digital I/O

  • 4 x digital solid-state output (max. 36 V - 1.5 A); short-circuit proof; inductive loads up to 20 mH
  • 6 x Digital input (Logic High: 8..40 V DC; Logic Low: -5..3 V DC; impedance: 14 kΩ @ 12V )
  • Transient protection
  • Low pass filter
  • expandable with Modbus modules

Analog I/O

  • 2x analog input (0..10V)
  • 12 bit resolution; ±0.6% FSR @ 25°C
  • Low pass filter
  • Transient protection
  • expandable with Modbus modules

Sensors

  • On-board temperature sensor
  • 3-axis accelerometer +/- 16g@16b
  • 3-axis gyroscope +/- 2000dps@16b

Energy

  • Power-saving modes
  • Events: Timer, digital input, accelerometer, RS232, RS485, CAN, Cellular, Power Change
  • Current consumption while waiting for event: from 0.4 mA @12V
  • Monitoring supply voltage and type

Battery and charging logic

  • Internal 2 Ah (nominal) Li-Ion battery
  • Intelligent charger with temperature controller and support for temperatures below zero degrees

Electrical data

  • Operating voltage 8..36 V DC
  • Reverse polarity protection
  • 5 VDC-out @ 500 mA

Climate

  • Operation: -40..+65 °C
  • Battery charging: -10..+45 °C
  • Storage: 0..+45 °C
  • Humidity: 5..90 (non-condensing)
  • Protection class: IP20 (with inserted connectors)

Mechanical data

  • Dimensions (mm, without connections): 97 (W) x 132 (L) x 35 (H)
  • Aluminium/plastic housing
  • Weight: approx. 300g (without accessories)

Approvals

  • 2007/46/EC UN ECE R10 Rev. 05 (E1)
  • 2014/30/EU EMC Directive
  • 2011/65/EU RoHS Directive
  • Cellular: GCF/CE/FCC/PTCRB/IC/Anatel/SRRC/NAL/ CCC/KC/NCC/JATE/TELEC/RCM/IFETEL/FAC/ NBTC/ICASA