M2M Control C360

The M2M Control C360 is a 3G (UMTS/HSPA)  remote control unit especially suitable for wireless monitoring & control, data logging and remote access. The C360 telemetry module combines a freely programmable PLC controller, a data logger with an integrated GSM/GPRS modem. This makes the C360 to a very powerful solution for professional industrial wireless applications like,

  • Remote monitoring and control
  • Security & surveillance
  • Industrial and Building automation
  • Energy management & control
  • Water management                          …   and many more

The unit has an enhanced set of features, including multiple RS-232 and RS485 ports with full MODBUS support (Master / Slave), a CAN Bus and 1-Wire interface as well as 8 digital inputs (4 of them configurable as S0 inputs), 8 outputs, 4 analog inputs and outputs. The onboard inputs and outputs can be expanded completely transparent by adding external MODBUS compatible I/O modules.

The GSM/GPRS based communication supports SMS/PDU messages, IVR (Interactive Voice Response) implementation using Voice/DTMF, CSD data calls as well as an optimized host implemented TCP/IP stack with SMTP, FTP, UDP and MQTT protocol support. The unit supports also our M2M GPRS Gateway middleware solution which enables a bidirectional without the need of fixed IP addresses.

The C360 is fully programmable (IEC 61131-3 ST) and configurable by the user user-friendly M2M Control IDE development environment, either locally via serial port or remotely via UMTS/GPRS network.

The hardware is based on our reliable X32-architecture (ARM7) and is equipped with advanced power management. The unit has extremely low power consumption and can be powered by batteries or solar panels. The C360 has an industrial grade design, M36 DIN rail mounting and can be powered with wide range of supply voltage (9…36 VDC). 

 

 

  • Real-time clock
  • Graphical Display
  • 4 bi-colored LED's
  • 1 MB for data logs
  • 3.5 MB flash memory for 
    applications and voice
  • 256 KB for programs
  • 1 MB RAM / 8 KB FRAM
  • SD card reader with FAT       
    file system
  • SIM card & SIM Chip

 

  • 2x RS-232 / 2x RS-485)
  • MODBUS & M-Bus protocol support
  • S0 interface (IEC62053-31)
  • 1-wire & iButton support
  • Full CAN 2.0B controller
  • Voltage monitoring
  • Power saving modes
  • Vibration sensor
  • Temperature sensor
  • MQTT Protocol support
  • internal battery: 2000 mAh

 

 

I/O Interface

  • 8 digital inputs    (4 configurable as S0/IEC62053-31)
  • 8 digital outputs
  • 4 analog inputs:    0-10 Vdc or 0-20 mA (10/12 bit Resolution)
  • 4 analog outputs:  0-10 Vdc or 0-20 mA (10 bit Resolution)

 

Communication

  • Penta-band 3G UMTS/HSPA u, GSM 
  • 2x RS-232 Port
  • 2x RS-485
  • CAN 2.0B
  • 1-Wire Interface
  • USB
     

GSM / UMTS

  • GSM: 850/900/1800/1900 MHz.
  • UMTS: 800/850/900/1900/2100 Mhz.
  • CSD with up to 14.4 Kbps.
  • SMS (text and PDU)
  • eCall Accident
  • externa SIM card reader (1.8/3V)
  • Optional: SIM Chip
  • external antenna (SMA)

Protocols

  • TCP/IP, UDP
    •  FTP
    • SMTP
  • NMEA through the serial ports
  • IEC 60870-5,  IEC61850 (i.V.)
  • Modbus (master/slave)
  • M-Bus (master),  EN13757
  • CAN 2.0B (FMS, J1939)
  • MQTT Protocol 

Power Supply

  • Supply Voltage:             8-36 Vdc
  • Power consumption:       45-65 mA @12 Vdc
                                         < 0,5 mA in powerdown-mode

 

  • Ethernet Interface
  • Bluetooth Interface
  • 1-Wire Temperatursensor
  • 1-Wire iButton Reader
  • VGA Kamera